User manual

Accurate Technology Digi Fence Page 5 of 16
SECTION 1 GENERAL INFORMATION
Introduction
This is a custom engineered system that adds a digital readout to your existing
commercial style Table Saw fence. This kit is supplied with an Digi-Scale measuring
system, and all the components needed for a quick and easy retrofit to your existing
fence. The readout has easy-to-use front panel keys for calibration, incremental
measurements, and changing of measurement units. User selectable resolution will
display fractions in 16ths, 32nds, or 64ths; inches as .01 or .001, and millimeters as .1
or .01. The system is powered by two AA alkaline batteries. It is immune to dirt,
sawdust or other non-conductive contaminants making it the ideal choice for shops and
other dusty environments.
What This Manual Includes
This manual includes information for the following Digi Fence Systems:
Biesemeyer & General Part Number: 903-1000-001
SawStop & Steel City Part Number: 903-1007-001
Delta Unifence Part Number: 903-1004-001
XACTA II / Powermatic Part Number: 903-1001-001
XACTA II / HTC Part Number: 903-1013-001
Safety Speed Cut QuickStop Part Number: 903-7001-001
Felder K700 Series Part Number: 903-7002-001
Digi Fence Specifications
Measuring Range 60 inches
Accuracy: + .01inch
Resolution .1in/.1mm. or 01in/.1mm or .001in/.01mm or 1/16, 1/32, 1/64
Repeatability: .01inch or .1mm
Readout Range: + 999.999 in; + 399 63/64 in; + 9999.99 mm
Operating Temp: 32 to 120°F
Max. Slew Rate: 15 inches/sec. (400 mm/sec.)
Encoder: 24 inch six-conductor cable terminated by RJ11 connector.
Dimensions: Available at on request.
Warranty: One year from date of purchase.