User manual

Accurate Technology Digi Fence Page 11 of 16
Changing the Batteries
A “BAT” indicator will appear in the upper left corner of the LCD display when new
batteries are needed.
Remove the screws in the upper right and lower left corners. Pull the cover off.
Remove the old batteries. Reinstall new AA Alkaline batteries, noting the proper
orientation. Replace the cover and tighten the screws.
CAUTION: DO NOT BEND BATTERY CLIPS!
THESE CLIPS ARE DESIGNED TO BE LOOSE WHEN THE CASE IS OPEN AND
WILL COMPRESS AND SECURE THE BATTERIES IN PLACE WHEN THE CASE
HALVES ARE SCREWED TOGETHER.