User manual

DigiScale Manual Part # 800-1404-001 Page 24 of 36
SECTION 4 COMPACT READOUT
This Section includes information for:
Digital Readout, LCD, Compact Part Number: 700-1600-710
With Firmware Version b 1.xxx & higher
(Press the DATUM key for 7 seconds to display Readout Firmware version)
Mounting
Surface Mount Configuration
The Compact readout may be mounted:
• Using Velcro or Double sided tape
• Punch out any of the four holes from the inside of the back case.
• Using any of the four holes on the back of the case. NOTE: Use a #4 or
M3 screw not longer than 3/8 “ (9mm).