Specifications

Accurate Technology ProScale Model 18W Page 15 of 20
Changing the Batteries
A low battery indicator will appear in the lower left corner of the LCD.
Press and hold DATUM key for 6 seconds to display the Battery Voltage.
When battery voltage drops below approximately 2.6V the DRO will turn itself
off until the batteries are replaced.
To replace the battery:
Remove the screws in the upper right and lower left corners. Pull the cover
off. Remove the old batteries. Reinstall 2 new AA Alkaline batteries, noting
the proper orientation. Replace the cover and tighten the screws.
CAUTION: DO NOT BEND BATTERY CLIPS!
THESE CLIPS ARE DESIGNED TO BE LOOSE
WHEN THE CASE IS OPEN AND WILL
COMPRESS AND SECURE THE BATTERIES IN
PLACE WHEN THE CASE HALVES ARE
SCREWED TOGETHER.