Specifications
Table Of Contents
3
CAUTION AND WARNING
To prevent injury and damage to your scale, please follow these instructions very
carefully.
Assemble and operate the scale per the enclosed user instructions.
For accurate weighing, this scale must be placed on a flat, stable surface.
For accurate weighing, verify before each use the proper operation
according to the procedure described in this manual.
Operating this scale at voltages and frequencies other than specified can
damage the equipment and will void the warranty.
Do not transport the scale with any weight on the platform.
Do not exceed recommended weight limit of 500 lb / 220 kg for this scale.
Do not use in the presence of flammable or explosive materials.
For accurate weighing, if the “Lo bAtt” indicator activates, replace the
batteries or switch to the optional AC adapter as soon as possible.
If the scale becomes damaged, it should not be operated until properly serviced. All
repairs should only be performed by authorized Health o meter® Professional
service personnel.
When replacing / inserting batteries, be sure to use all new batteries.
To prevent patient injury, the patient must be attended throughout the
entire weighing event.
When operating this scale with the optional AC adapter:
Operate this scale exclusively with the AC adapter offered by Health o
meter. Use of an unspecified adaptor will void the warranty, and can pose
a serious safety hazard.
For use with AC adapter model ADPT30 (international, plug kit) or
ADPT31 (Domestic, USA).
Prior to using this scale, inspect the AC adapter cord for cracking /
fraying, or for broken / bent plug prongs.
Prior to using this scale, ensure that the AC adapter is plugged into an
outlet with the rated voltage appropriate for operation.
Ensure that the AC adapter outlet is wired to a circuit breaker or other
protected power source.
Ensure that the AC adapter and scale do not come in contact with liquids,
excessive temperature, or excessive humidity.
If the scale is being connected to another medical device, the power
adapter must not be used. Disconnect the power adapter from the scale
and use only the battery power. This ensures proper electrical isolation.