Specifications

7
77
7
DigiPump
DigiPump DigiPump
DigiPump SR7x
SR7xSR7x
SR7x Sy
Sy Sy
Syringe Pump
ringe Pump ringe Pump
ringe Pump Operator
OperatorOperator
Operators
ss
s Manual
Manual Manual
Manual
2. Syringe Pump Operation
2.1 Basic Operation Steps
Step 1 Power connection
Insert the power cord into the power supply (AC 100 V240V, 50/60 Hz).
Connect the power cord as shown.
Step 2 Turn the Power On
Keep pressing Press POWER key for 3 5 seconds and then release it. The Digipump SR7x
start a self-test, all indicator lights and enters in operation mode.
Note: When the orange AC light is on, the syringe pump is using AC power and the battery is
being charged automatically.
Press the POWER key (just one touch) to turn-on the LCD back-light to dark vision.
Step 3 Install the syringe
Install the syringe as shown in the figure.
(1) Pull the Syringe Holder and move 90° to the left or right.
(2) Press clutch button, drag piston to fit the desired syringe;