User Manual

1
Introduction
he User Manual simplifies the installation and operation of the product. The
careful observation of the points that are laid out in the User Manual will
ensure that the product works in accordance with the intention of the
manufacturer. The Terms and Agreements that are set forth shall be
invalidated if the instructions that are presented in the User Manual are not observed.
Product Description
The product is a portable heat recovery ventilator which is housed in a compact and
attractive cabinet enclosure. The heat recovery ventilator is designed to supply filtered,
fresh air into a building space, passively regulate the temperature and humidity of air,
and simultaneously expel stale air and contaminants from the same space.
The external and internal parts of the product are visually depicted in Figures 1 and 2,
respectively.
(a)
(b)
Figure 1. The (a) top and (b) side views of the portable heat recovery ventilator.
The legends A to E are defined in Table 1. The approximate external dimensions of the product are 30 in × 12 in × 12.5 in
(76.2 cm × 30.5 cm × 31.8 cm). The actual product that is received by the customer may slightly differ from what is shown in Figure 1.
Note. Figure 1 is not drawn to scale.
T
I C O N K E Y
Warning

Note
†
Caveat
2
Figure 2. Internal parts of the portable heat recovery ventilator. The legends F to J are defined in Table 1.
The actual product that is received by the customer may slightly differ from what is shown in Figure 2.
The parts of the product that have been identified with the legends A to J in Figures 1
and 2 are defined in Table 1.
Table 1. Parts of the portable heat recovery ventilator.
Legend
Part
Reference Figure
A
Supply vent
Figure 1(a)
B
Supply duct
Figure 1(a) and (b)
C
Exhaust vent
Figure 1(b)
D
Exhaust duct
Figure 1(b)
E
Power supply cord
Figure 1(b)
F
Supply fan
Figure 2
G
Exhaust fan
Figure 2
H
Heat exchanger
Figure 2
I
Power bar
Figure 2
J
Supply fan controller
Figure 2