Safety data sheet
Material Safety Data Sheet Page 6 of 8
Report No.: DGC160223010GE
This document cannot be reproduced except in full, without prior written approval of ATC. Any unauthorized alteration, forgery or falsification of the content or appearance of
this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
Accurate Technology Co., Ltd.
Address: No.345, Baima Block, Guantai Road, Nancheng District, Dongguan, Guangdong, China
Tel: (+86-769) 23301666 Fax: (+86-769) 23301600 Email: dgcs@atc-lab.com Http://www.dgatc-lab.com
Other protection: In the workplace non-smoking or eating. Use standard lead-acid battery practices. Do
not wear metallic jewelry when working with batteries. Use non-conductive tools only. Discharge static
electricity prior to working on a battery. Maintain fire extinguisher and emergency communication device
in the work area. After work, take a bath. Separate storage of contaminated clothing, washed standby.
Pay attention to personal hygiene.
Hygiene measures: Follow correct safety rules, do not reuse the container that repair or without trade
processed. Refer to the MSDS measures, even an empty container handling.
Section 9 - Physical and Chemical Properties
Physical State: solid
Color: black
Odor: Odorless
Mechanical resistance: N/A
Section 10 - Stability and Reactivity
Stability: Stable under normal use, hazardous reactions occuring under specific conditions, such as
overheating and overcharging.
Avoid material: Conductive materials, water, seawater, strong oxidizers, strong acids, strong alkaline
materials, organic solvents
Avoid contact with conditions: When a battery cell is exposed to an external short-circuit, crushes,
modification, high temperature above 100 ℃, it will be the cause of heat generation and ignition. Direct
sunlight and high humidity.
Hazardous decomposition products: Once batteries are breakage, split sulphuric acid should be
careful which is corrosive, nonflammable liquid (thermal decomposition at 338℃) and destroys organic
materials such as cardboard, wood, textiles and reacts with metals, producing hydrogen. Acrid or
harmful gas is emitted during fire.