Certifications 2

Material Safety Data Sheet
Report No.: TCT171228M040 Page 4 of 8
Hotline: [phone] Tel: [phone] Fax: [phone] http://www.tct-lab.com
Fire-extinguishing
Methods and
Extinguishing
Media
For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.
Attention in
Fire-extinguishing
Wear self-contained breathing apparatus in pressure-demand, MSHA/NIOSH
(approved or equivalent) and full protective gear.
Section 6- Accidental Release Measures
Personal Precautions, protective
equipment, and emergency procedures
In case of rupture. Attention! Corrosive material.
Avoid contact with skin, eyes and clothing. Ensure
adequate ventilation. Use personal protective
equipment as required. Evacuate personnel to safe
areas. Keep people away from and upwind of
spill/leak. Refer to protective measures listed in
Sections 7 and 8.
Environmental Precautions
Prevent product from contaminating soil and from
entering sewers or waterways.
Methods and materials for Containment
Stop the leak if safe to do so. Contain the spilled
liquid with dry sand or earth. Clean up spills
immediately.
Methods and materials for cleaning up
Absorb spilled material with an inert absorbent (dry
sand or earth). Scoop contaminated absorbent into
an acceptable waste container. Collect all
contaminated absorbent and dispose of according to
directions in Section 13. Scrub the area with
detergent and water; collect all contaminated wash
water for proper disposal.
Section 7- Handling and Storage
Handling
In case of rupture. Handle in accordance with good
industrial hygiene and safety practice. Avoid contact
with skin, eyes or clothing. Use personal protection
equipment.
Storage
Store in a cool, dry, well-ventilated area away from
incompatible substances. Store locked up. Keep out
of the reach of children.
Other Precautions
The battery may explode or cause burns, if
disassembled, crushed or exposed to fire or high
temperatures. Do not short or install with incorrect
polarity.