Network Cables User Manual

support.dell.com Microprocessor Upgrade Installation Guide 1-5
DELL CONFIDENTIAL - Preliminary 9/11/00
(Rev. 11/3/98) FILE LOCATION: S:\SYSTEMS\SlimFast\ts\ProcUpgrade\028WD\028wdeb0.fm

4. Remove the SEC cartridge and heat sink as follows.
 $*="=
=
 *=0
<

a. Pull the tab on one side of the guide-bracket assembly away from the end of
the heat sink and pull up slightly on the SEC cartridge and heat sink (see
Figure 1-2).
b. Pull the tab on the other end of the guide-bracket assembly to disengage the
tab on the heat sink, and then lift the SEC cartridge and heat sink away from
the guide-bracket assembly (see Figure 1-2).
thumbscrew
retention pins (2)