Use and Care Guide
Felix Storch, Inc. 
SUMMIT PROFESSIONAL DIV.     Page 9  
KEYPAD LOCK (optional on most models)  
Factory set default password: T
he factory set default password is 0123. If the default password is lost
, 
press the   key (located inside the battery box) for 30 seconds, then wait for the warning sound 
which signifies the factory set default password has been restored. 
To  set  the  password
: While door is open, press the   key (located inside the battery box) until it 
jingles, enter the 0123 password then the # key within 10 seconds to confirm. Enter the password (1-16 
digits), then press # again to confirm. A total of 10 passwords can be set. 
Note: Each password starts from the number 0 to 9 in order. The first password starting with 0 is the default password. 
 For example, use 1xxx, then 2xxx etc. for 10 users. 
Changing  password: While the door is open, press the   key (located inside the battery box) until it jingles, enter the 
old password and press # within 10 seconds to confirm. Enter new password then press # to confirm. Note that the first 
digit cannot be changed. 
To open the door: While the door is closed, press the   key, enter the password then press   again to confirm. 
To lock door manually: Press #.  
Function  setting  of  automatic  lock: To set the auto-lock to lock on a preset time interval, press the  key (inside the 
battery box), enter a number (the time interval in seconds from 10-99) then press # to confirm. The auto-lock time can be 
set  between  10-99  seconds  after  opening  the  door.  If  the  time  is  set  less  than  10  seconds,  the  door  will  not  lock 
automatically, only manually.   
Deleting  the  door-opening  passwords
:  Press the   key, enter default password followed by 0000, then press # and 
all the door-opening passwords will be deleted except for the default password.  
Note: To access the battery box you need to remove only the two small screws on the top and bottom of that cover. Do 
not remove the 4 screws holding the keypad and cover to the appliance door.   
IF YOUR MODEL HAS A FRONT LOCK (SELECTED MODELS)  
Your lock has a feature called automatic key eject. To lock or unlock the appliance, you must push and hold the key in the 
lock while turning. The lock is spring-loaded, so the key cannot be left in the lock. 
If  the key  is  lost,  contact  your  dealer  or  SUMMIT  APPLIANCE  to  purchase  a  replacement.  Always  give  the  model  and 
serial number of your appliance when requesting a replacement key. Keys for most models can be ordered online at 
www.summitapplianceparts.com  
NEVER KEEP KEYS WITHIN THE REACH OF CHILDREN 










