Use and Care Guide
PLACING AND INSTALLATION 
 It is important to make sure the appliance is leveled evenly to 
prevent falling. 
 Two spacers attached to the appliance must be fitted onto the 
upper edge of the condenser, thus preventing the appliance from 
being installed too close to the wall.  Spacers are manufactured for 
all-purpose functions depending on the distance of the condenser from 
the wall. Therefore turn spacers correspondingly and adjust them 
accordingly to the appliance. 
Connection to Power Supply 
Connect the appliance with the cable and plug to the power supply 
socket outlet with a ground terminal (safety socket). 
“DO NOT USE AN EXTENSION CORD.” 
 Required nominal voltage and frequency are indicated on the rating 
 plate. The connection to the power supply and grounding has to be 
 made according to current standards and regulations. The appliance 
 resists temporary voltage tolerance up to -15 to 10%. 
Instructions for Use 
5










