Use and Care Guide
ManualsBrandsAccuCold ManualsCompact Refrigerators19 Inch Compact Top Freezer Refrigerator with Combination Lock, Buffer Temperature Probe, Adjustable Shelves, Interior Light, NIST Calibrated Thermometers, Door Storage, Cycle Defrost, CFC Free, 2.9 cu. ft. Capacity and ADA Compliant: White, ADA Compliant
10
Temperature Selection & Monitoring, cont’d
Digital Thermostat (standard on all-refrigerators, ACF48W
models, and VT65MLADA models):
If you find it necessary to change the temperature setting for your digital thermostat,
please refer to the following instructions.
How to Adjust the Temperature:
To see the SET POINT:
The default display for your digital thermostat is the internal cabinet temperature. To
view the unit’s set point, push and immediately release the SET key. The display will
flash, showing the set point value. If no other actions are taken in 6 seconds, the
display will revert to the internal air temperature.
To change the SET POINT:
While the set point value is blinking, press the UP or DOWN arrow to change the set
point to your desired temperature. Press the SET button again to exit the adjustment.
The display will revert to the internal air temperature.
PLEASE NOTE: the temperature displayed on the digital thermostat is the internal air
temperature. Your alarm/thermometer (installed on the left in the control panel)
provides a temperature readout based on the buffered probe in order to better
simulate the temperature of what is actually stored inside the unit (as opposed to the
air temperature itself). As a result, these readings may not always display the same
temperature reading.
NOTE: The minimum and maximum range of your thermostat is preset and
locked so it cannot easily be accidentally moved outside of the
recommended temperature ranges.
Note:
Details may vary
from image.