Temperature Data Logger Manual

AccuCold, Div of Felix Storch, Inc. | R005-07102018
7
Please note:
 When the MEM is full, the unit overwrites old data
 If the temperature sensor is loose or not inserted, “NP” will be displayed and the NP alarm will
be activated.
 When PAS is 0 there is no password. User can enter parameter setup directly.
 When the logging interval (LI) =0, the record interval is 10 seconds.
 To modify the factory settings: Press the SET key for 3 seconds to enter parameter setup state.
After adjusting parameters, press SET key button again for 3 seconds. “COP” will be displayed.
The modified and stored set temperature and parameters will be new default settings.
 To resume original factory settings, press DL and SET keys simultaneously for 3 seconds, “888”
will display when the parameters are reset to factory settings.
 To resume customer‟s default settings, press ▲ and ▼ keys simultaneously for 3 seconds, “888”
will display when the parameters are reset to customer‟s default settings.
CSV File
 To download data, USB drive is ejected safely and connected to a computer. Open file(s) in
Microsoft Excel or any .CSV compatible program.
 Data results will be displayed in tabular form as shown below:-
Date
Time
Temp
Hi Alarm
Lo Alarm
Hi Alarm
Setting
Lo Alarm Setting
6/12/2018
16:33:27
24.9C
0
0
30.0C
-10.0C
6/12/2018
16:32:27
24.9C
0
0
30.0C
-10.0C
6/12/2018
16:31:27
24.9C
0
0
30.0C
-10.0C
6/12/2018
16:30:27
24.9C
0
0
30.0C
-10.0C
6/12/2018
16:29:27
24.9C
0
0
30.0C
-10.0C
6/12/2018
16:28:27
24.9C
0
0
30.0C
-10.0C
6/12/2018
16:27:19
24.9C
0
0
30.0C
-10.0C
Date
Time
(24 hour
clock)
Temperature (
o
C)
High Alarm & Low Alarm
temperature status
0 = No alarm event
1= Alarm event
Low Alarm & High Alarm
Temperature Setting in
Degrees Celsius