Temperature Data Logger Manual

AccuCold, Div of Felix Storch, Inc. | R005-07102018
3
To Use
NOTE: Before use, remove and discard the clear plastic protective film from the screen (LCD).
 Place the temperature sensor (in glycol bottle) in the location to be monitored, such as inside a refrigerator or
freezer. The data logger may be placed on top of unit with LCD display easily visible and the alarm audible. Data Logger
displays internal temperature of unit being monitored, as well as maximum and minimum temperatures reached.
The Data Logger’s maximum and minimum readings reflect the highest and lowest temperatures since the unit
was powered or since the MIN/MAX history was cleared.
 If the temperature measurement rises above or falls below the set temperature range, the alarm will sound. To
silence the alarm, press any key ONCE.
 Clear MIN/MAX history once the unit is stable.
Parts and Controls/Features
LCD Display Description
Icon
Description
1
MEM is memory capacity.
When MEM reaches the 10th grid, MEM is full.
MEM can hold data for one year.
2
BAT is battery capacity.
3
Current temperature value is displayed
4
When "REC" is displayed, it means the logger is
logging temperature; When "STOP" is displayed, it
means the logger is not logging.
5
Maximum temperature value during a data logging
session is displayed
6
Minimum temperature value during a data logging
session is displayed
7
High temperature alarm status
8
Low temperature alarm status
9
°C: Celsius temperature units;
°F: Fahrenheit temperature units
10
Time icon: HH:MM:SS (24-hour clock)
11
Date icon: YYYY-MM-DD
USB port
Buttons
LCD