Temperature Data Logger Manual

AccuCold, Div of Felix Storch, Inc. | R005-07102018
2
READ ALL INSTRUCTIONS BEFORE USE
Package Contents
Installing the Data logger
1. Install the backup battery
Unscrew the battery compartment cover located on the back of the unit and install the battery. Follow
polarity (+/-) diagram below. Replace the battery cover. The unit will beep and all segments of the LCD
will be activated.
2. Connect the temperature sensor and power adapter plugs
Do not use force to connect the probe or the power adapter plugs. The power adapter plug is different from
the probe plug.
 Data logger
 Temperature sensor (NTC)
in a glycol-filled bottle
 Instructions manual
 Rechargeable x2 AA
batteries (1.5Volts)
 4 GB Memory stick [FAT 32]
 Power adapter
 Antistatic bag
 NIST-traceable
calibration certificate
Power
supply port
Temperature
sensor port
DL2B side view
DL2B rear view