Instruction Manual

Changing the Direction of Opening the Door
If you find the direction of opening the door on your appliance inconvenient, you
can change it. Holes on the opposite side have already been prepared at the
factory (except on stainless steel towel bar models).
• Take off the upper hinge cover and unscrew the upper and lower hinges.
• Remove the kick plate and place it in its new position.
• Unplug the holes covering the holes on the opposite side of the appliance
door.
• Place the lower hinge on the opposite side of the appliance and put the
door on.
• Fix the upper hinge and cover it.
• Unscrew the handle and replace it to the opposite side (not for handles
mounted horizontally).
• Plug the remaining holes with decorative caps.
• Check the gasket, it should not be creased and should seal well.
Changing the Direction of the Opening Door on the Low
Temperature Compartment
•
Unscrew the blocking element and the hinge of the low temperature
compartment and take off the door.
•
Plug the holes with the plastic caps provided.
•
Turn the door 180° and replace it on the opposite side of the low
temperature compartment. Fix the hinge and the blocking element of the
door (position of holes already provided).
Instructions for Use