User Manual
5 
TECHNICAL INFORMATION 
Model Numbers 
CT66JBI/CT66WBI/AL650WBI (white)  
CT66LBI/CT66LWBI/AL650LWBI (white with lock) 
CT66BBI/CT66BKBI/AL652BKBI (black exterior) 
Capacity 
5.1 cu. ft. 
Electrical Input 
115V AC/60Hz 
Rated Current 
1.3A 
Temperature of 
Freezer 
5°F 
Refrigerant 
R134a: CT66JBI, CT66LBI, CT66BBI 
R600a: CT66WBI, CT66LWBI, CT66LWBI, CT66BKBI, AL650WBI, 
AL650LWBI, AL652BKBI 
Installation 
Built-in or Freestanding 
Ship Weight 
102 lbs. 
Unit Dimensions 
(W x D x H) 
23.63" x 23.5" x 33.25" 
*Units with suffix "ADA" or prefix "AL" are sized at 32" for use under in ADA compliant applications 
NOTE: Specifications are subject to change without notice. 
INSTALLATION INSTRUCTIONS 
Before Using Your Appliance 
• Remove the exterior and interior packing. 
• Before connecting the unit to a power source, let it stand for approximately 2 hours. This will 
reduce the possibility of a malfunction in the cooling system from handling during transportation. 
• Remove the crisper, drip tray and shelves and clean them and the interior surfaces of the unit 
with lukewarm water using a soft cloth. 
Installing the Refrigerator-Freezer: 
•
Place the unit on a floor that is strong enough to support the appliance 
when it is fully loaded. To level the unit, adjust the two leveling legs at 
the front. 
•
These models can be installed either free-standing, recessed or built 
into an enclosure. When installing as a free-standing unit, allow at least 
2” (51mm) of space at the sides, top and rear of the unit to allow for 
proper air circulation to cool the compressor and condenser. Even 
when built in, the unit requires at least 2” of clearance at the back, 1/8” (3mm) at both sides and 
1/16” (1.6mm) at the top. Take care that the air vents at the front of the appliance are never 
covered or blocked in any way. 
•
This appliance is supplied with spacers that have to be mounted onto the condenser tube to 










