Instruction Manual
10 
Energy-Saving Tips 
• The unit should be located in the coolest area of the room, away from heat-producing appliances 
or heating ducts and out of direct sunlight. 
• Try not to open the door too often, especially when the weather is damp and hot.  Once you open 
the door, close it as soon as possible. 
• Occasionally check if the appliance is sufficiently ventilated (adequate air circulation behind the 
appliance). 
• Set the thermostat from higher to lower settings as soon as possible (depends on how loaded the 
appliance is, ambient temperature, etc.). 
• Before loading items into the unit, be sure they have cooled to ambient temperature. 
• A layer of frost and ice increases energy consumption, so defrost the freezer as soon as the layer 
is 1/2" thick. 
• For best storage, be sure not to over-pack and assure the freezer door closes fully. 
1.  Lights on these units are controlled by a plunger type switch, so that the interior light comes on 
automatically when the refrigerator door is opened. 










