Owner Manual

8
OPERATING YOUR REFRIGERATOR OR
FREEZER
It is recommended you install the refrigerator or freezer in a place where the ambient temperature is
between 44º and 90ºF (7º to 32ºC). If the ambient temperature is above or below the recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in
extremely cold or hot conditions may cause interior temperatures to fluctuate. The operating
temperature range may not be reached.
NOTE: If the door of the unit is left open for more than five seconds, an alarm will sound. The alarm
will stop once the door is closed.
Control Panel for Digital Thermostats
Refrigerators and freezers include a digital thermostat located in the kick plate of your unit.
Indicator Symbol Table:
Press and hold the SET and the LIGHT keys for three seconds to turn the unit on/off.
To adjust the temperature, press and hold the SET key for 3 seconds. When the display shows
St, you can raise the temperature by pressing the LIGHT key or lower it by pressing the MENU
ADJUST key, shown below. Press the key, or press no key for 30 seconds, to exit. The
temperature set-point will be saved automatically.
Indicator
Symbol
Status
Meaning
Setting
Set
ON
Set parameters
OFF
Temperature measuring and controlling
Cooling
ON
Cooling active
OFF
Cooling inactive
Flash
Cooling delays
Defrost
ON
Defrost active
OFF
Defrost inactive
Fan
ON
Fan active
OFF
Fan inactive
Dripping
drip
ON
Dripping active
OFF
Dripping inactive
Door signal
ON
Door is open.
OFF
Door is closed.