User Guide Pro Authenticator D580
Thank you for purchasing this AccuBANKER product. We recommend reading all information in the user guide to become familiar with this product. AccuBANKER and its logo are registered trademarks of Hilton Trading Corp. All Rights Reserved.
Table of Contents 1.0 Before starting.............................................................4 3.0 Operation....................................................................10 2.0 4.0 5.0 6.0 Setting Up.....................................................................8 Software Upgrade Procedure...................................14 Maintenance...............................................................15 Specifications............................................................
1.0 Before Starting Counterfeit money could potentially cost your business hundreds and possibly thousands of dollars. Due to complex copiers, high-resolution scanners and other equipment, it is harder than ever to detect fake bills. The new D580 Counterfeit Detector uses the latest in counterfeit detection technology to alert you to fraudulent money.
1.0 Before Starting Cont. • Integrated Rechargeable Long Lasting Batteries • Easy Software Upgrade and Maintenance • Battery Status Indicator We recommend the user to verify that the box contains all of the items listed here: 1. D580 Unit 2. User’s Guide 3. Warranty Card 4. Receiver Tray 5. 110V-220V AC/DC Adaptor 6. Interface Cable for Upgrade.
1.0 Before Starting Cont. 1.2 Battery Information The battery status is displayed on the upper right corner of the display window. A solid symbol means the battery is full and an empty symbol means the battery is dead. If the symbol is flashing and changing from solid to empty, it means the battery is being charged. When the battery is not enough, “Low Battery” message will be displayed. If the battery is too low, the detector will automatically turn off.
1.0 Before Starting Cont. 1.4 Parts Description 1 2 3 4 5 1. Receiver Tray 2. LCD Display 4. Adjustable Slider 5. Feeding Slot 7 3.
2.0 Setting Up Connect the adaptor to the unit and then to a power outlet (the unit will work with its own batteries if these are charged). Proceed to turn the unit ON by pressing for 3 sec the ON/OFF switch. If there is not any error during its starting self test, the LCD display will show the “READY” message, indicating it is ready to start detecting. 1. On/Off button 2. Ejecting Direction 3. Currency / Clearing 4.
2.0 Setting Up Cont. 2.1 Bill Ejection Setting The user can set the unit with two different ejection settings directions for the scanned bill: ejection by the frontal slot or ejection by the rear slot. To set the desired option, the user must press the “DIR” button once and the arrow on the display will show the ejection direction selected. If the ejection setting is selected to eject bills by the rear slot, the stacking tray should be attached to the unit. 2.
3.0 Operation 3.1 Bill Detection • Avoid inserting banknotes that are torn, too old or crumpled. • Avoid banknotes that have staples attached, or have been covered totally or partially with adhesive media. • Never insert wet or heavily stained bills. Insert the banknote to be verified by the feeding slot, doesn’t matter the feeding orientation you chose, the unit is able to recognize and verify the note as is. The bill must be fed as close as possible to the right edge, as the figure show.
3.0 Operation Cont. • If the bill is recognized as a genuine bill, the unit will display the banknote’s value as well as the number of bills and the grand total value already scanned. • If the bill is recognized as a suspicious banknote, a warning message will be shown on the display with the error code that belongs to the specific parameter was detected as suspicious. Also the unit will sound warning 3 beeps to confirm the banknote suspicious condition.
3.0 Operation Cont. 3.2 Reporting Mode Meanwhile the user is scanning the bills, the display will show 4 types of data: 1. Banknote’s Type (USD,EURO,NGN…etc) 2. Banknote’s Denomination 3. Total Banknotes Number (for this specific currency) 4.
3.0 Operation Cont. 3.3 Print Report After detecting the notes, press “STA” key for 2 seconds, the “Print” message will be displayed on the display and the report will be printed. After finishing printing, the detector will return to scanning preparation condition. If the serial number identification function is available, the serial number will be printed at the same time. Important: Printing data procedure doesn’t delete the current counting record, you must clearing the data before next scanning event.
4.0 Software Upgrade Procedure It is possible to update the unit with new detection information when new bills are released. Once this update is installed, the unit will be able to recognize the new currency for which the update was created. Follow these instructions: 1. Turn off the detector first, and then connect the detector to the PC with the special cable for downloading. 2. Keeping pressed the “STA” key, turn the unit on. 3.
5.0 Maintenance 5.1 Cleaning the Sensors To keep the unit operating at peak efficiency, clean periodically (once a month) the internal sensors. Follow these instructions 1. Open the top cover 2. Using a cotton swab slightly soaked in alcohol, clean the sensors, magnetic heads and rubber wheels. 5.2 Replacing the battery The unit includes an internal Lithium-Ion rechargeable battery.
5.0 Maintenance Cont. 5.
5.0 Maintenance Cont.
5.0 Maintenance Cont. 5.
6.0 Specifications 1. Detection features: Magnetism, Infrared, Image, Spectrum, Length, Thickness 2. Dimensions: 220x140x90 (mm) 3. Power supply: AC100V~240V 50/60Hz or DC12V/1.5A 4. Operating temperature: 0~40oC (32~104oF) 5. Storage temperature: -20~65oC (0~149oF) 6. Battery: rechargeable lithium battery 10.8V/1000mAH 7. Power consumption: <10W 8. Speed: <0.5second/ note 9. Weight: 1.
www.accubanker.
