D500 Super Dollar Authenticator USER GUIDE wwwAccuBANKER.co www.AccuBANKER.com 1 m www.AccuBANKER.
Thank you for trusting AccuBANKER with your cash handling needs. In order to optimize the performance of your equipment, we encourage you to thoroughly read this user guide prior to use.
Table of Contents Table of Contents ............................................................................................. 3 Introduction ...................................................................................................... 4 Safety Instructions ............................................................................................ 4 Other Safety Considerations............................................................................. 5 Box Contents ...........................
Introduction The D500 Super Dollar Authenticator is part of our next generation in micro-technology. The streamlined design allows for simple banknote processing. Multiple counterfeit detection functions provide added security. Safety Instructions ! Warning Do not use this product in areas where it may be exposed to water or other liquids. Unplug this product from the electric outlet before cleaning. Do not use liquid or aerosol cleaners. To clean, use a damp cloth.
Other Safety Considerations • • • • • • • Read and understand all the safety instructions. Follow all warnings and instructions marked on the unit. Do not place near direct sunlight, heat sources, air conditioners, or in an enclosed space unless proper ventilation is provided. This product should be operated only from the type of power source indicated in this user’s guide. If you are not sure of the type of power supply in your location, consult your dealer or local power company.
Box Contents When opening the box, verify that all the items described below are included. If any item is damaged or missing, contact the place where the unit was purchased. 1. 2. 3.
Cleaning of the Machine ! WARNING: BEFORE DOING ANY CLEANING, TURN THE POWER SWITCH OFF AND DISCONNECT THE POWER CORD FROM THE MACHINE. KEEP IN MIND THAT PROBLEMS OR DEFECTS THAT ARISE FROM LACK OF PERIODIC MAINTENANCE ARE NOT COVERED BY THE WARRANTY. A) Cleaning the Optical Sensors Cleaning should be performed by an authorized service center. B) Cleaning the Inside of the Machine Periodically It is necessary to clean the inside of the machine once a month or when needed.
1. General Controls and Parts 1. Display Screen 2. Function Buttons 3.
1. General Controls and Parts (continued) 4. Ejection Slot 5. Power switch (On/Off) 6.
1. General Controls and Parts (continued) 1.1 Specific Controls 1. Value Number Display 2. Counting Number Display 3. Currency/Denomination Display 4.
2. Features 2.1 Automatic Feed The D500 is equipped with an auto-start sensor. The machine will automatically feed in and process banknotes that are placed in the tray. 2.2 Banknote Ejection Direction Banknotes may be ejected from either the back or the front of the machine after processing. 2.3 Report Function The D500 can show a summary report of the value and count for all banknotes processed by denomination. 2.
3. Operation 3.1 Basic Operation 1. Connect the 12V adapter to a power outlet and the jack on the rear of the machine. Turn the POWER switch ON. The unit will conduct a selfcheck at start-up. The Value display and Count display will show “0” when the unit is ready. 2. Place the banknote in the machine lengthwise, with the portrait facing up and to the right. 3. Genuine banknotes will pass through (or come back based on ejection direction setting) after one (1) beep. 4.
3. Operation (continued) 3.4 Counterfeit Detection There are four counterfeit detection methods: Illustration (Illus.), Infrared (IR), Ultraviolet (UV), and Magnetic (MG). All four methods work together at all times. 1) Illustration Detection This method checks for the illustration feature on the banknote. If the illustration is not detected the machine will alert with a triple beeping sound and reject the banknote by ejecting it to the front of the machine. Also, the Illus.
4. Solutions to Operational Problems 4.1 Preventive Measures Avoid strong light or magnetic sources that will disturb the counterfeit detection functions while operating the machine. Keep the sensors clean and free of dust. Unplug the machine when not in use. Pre-select the banknotes to be counted in the machine. Do not attempt to count: - Banknotes with metal clips - Broken banknotes - Banknotes with adhesive media (i.e.
4. Solutions to Operational Problems (continued) 4.2 Jamming • Before beginning operations of the machine, make sure there are no foreign objects in any of the mechanisms such as silica bags, spare parts, etc. • To avoid jamming, ensure that banknotes are placed correctly in the hopper. • If jamming occurs, power the machine off. Carefully remove the jammed banknotes from the machine with a wooden or rubber stick. Look for any foreign objects such as paper clips, rubber bands, etc.
5. Error Messages ERROR Illustration (Illus.) CAUSE Suspicious banknote for Illus. The banknote is suspected as false for improper Illus. Suspicious banknote for IR The banknote is suspected as false for improper IR markings. Suspicious banknote for UV The banknote is suspected as false for improper UV features. Suspicious banknote for MG The Banknote is suspected as false for improper MG features or lack of MG ink.
6. Specifications Ambient Temperature: 50 – 95 °F (10 – 35 °C) Ambient Humidity: 40 - 80% Feeding System: Roller Friction System Display: Graphical LCD screen with backlighting Power Source: 12V DC adapted from 110-220V, 60/50 Hz Power Consumption: < 10W Dimensions: 5.71” x 5.91” x 2.75” (14.50 x 15.01 x 6.99 cm) Weight: 1.2 lbs (0.54kg) Processing Speed: 60 bills/min (approx.
® AccuBANKER USA 7104 NW 50th St Miami, FL 33166 9AM- 5PM ET Monday through Friday www.AccuBANKER.
