Datasheet

P R O D U C T D A T A S H E E T
V E L O C I T Y C A B L E M A N A G E M E N T
©2010 Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, Saf-T-Grip, Seismic Frame, SlimFrame,
MegaFrame and TeraFrame are federally registered trademarks of Chatsworth Products, Inc. Cube-iT Plus,
Evolution, OnTrac, QuadraRack and Simply Efficient are trademarks of Chatsworth Products, Inc.
All other trademarks belong to their respective companies. 05/10 MKT-60020-475
O R D E R I N G I N F O R M A T I O N
Cable Ring Kit
The Cable Ring Kit creates a separate cable pathway on the back
o
f a Velocity Single-Sided Vertical Cable Manager for premise
c
ables.
• Match the kit to the width and height of the vertical cable
managers; one kit per manager
•
Attaches to the sides with included hardware
•
Rings are C-shaped, 3.0”H x 7.7”D (76 mm x 196 mm), with a
p
lastic latch that spins open to provide access to cables
• Cable opening on 3.6”W (91 mm) rings is 1.4”W (36 mm); cable
o
pening on other rings is 3.8”W (97 mm)
•
Rings are made from aluminum and painted black; latch is black
plastic
• Each kit includes multiple rings and mounting hardware. The
-
7X6 kits include six rings, the -7X7 kits include seven rings, the
-
7X8 kits include eight rings
Part
Number
Description
Height
ft (m)
Shipping
Weight
lb (kg)
For 3.6”W (91 mm) Managers
13934-716 For 6 (1.8) Manager, 13901-701 8 (3.6)
13934-717 For 7 (2.1) Manager, 13901-703 9 (4.1)
13934-718 For 8 (2.4) Manager, 13901-715 11 (5.0)
For 6”W (152 mm) Managers
13934-726 For 6 (1.8) Manager, 13902-701 9 (4.1)
13934-727 For 7 (2.1) Manager, 13902-703 11 (5.0)
13934-728 For 8 (2.4) Manager, 13902-715 12 (5.4)
For 10”W (254 mm) Managers
13934-746 For 6 (1.8) Manager, 13904-701 12 (5.4)
13934-747 For 7 (2.1) Manager, 13904-703 14 (6.4)
13934-748 For 8 (2.4) Manager, 13904-715 15 (6.8)
For 12”W (305 mm) Managers
13934-756 For 6 (1.8) Manager, 13905-701 14 (6.4)
13934-757 For 7 (2.1) Manager, 13905-703 16 (7.3)
13934-758 For 8 (2.4) Manager, 13905-715 18 (8.2)
Color is black.
Velocity Cable Management
Features quick and easy tool-less
snap together design that takes
approximately 3 - 5 minutes to
unpack, assemble and install
Step 1:
Insert mid panel
into plastic cable
side section
Step 2:
Insert the two
splice plates into
the slots at the end
of each side section
Step 3:
Slide the top side
section onto the
protruding ends of
the splice plates until
fully seated
Step 4:
Mount each cover
by positioning over
the hinges and
pressing firmly to
snap into place