User guide

Chapter 4: Boluses and TBRs ACCU-CHEK Spirit Insulin Pump
79
Cancelling a “Quick” Standard Bolus
– during programming (the bolus amount blinks):
• Press the key s or a you used to enter the “Quick” Standard
Bolus programming option. This will reset the bolus amount to 0.0
units. A melody will play. If no new bolus is programmed, your pump
returns to the RUN screen and beeps three times after five seconds.
No bolus is delivered.
– during confirmation (when the beeps and vibrations occur), or during the
start delay ( blinks):
• Press s or a. A melody plays. Your pump returns to the RUN
screen. An alert A8: BOLUS CANCELLED occurs. Press f twice to
confirm and turn off the alert. See the section “Alert A8: BOLUS
CANCELLED” (page 153) for more information.
No bolus is delivered.
– during bolus delivery (countdown of bolus amount):
• Press and hold s or a for 3 seconds until you hear a melody.
An alert A8: BOLUS CANCELLED occurs. Press f twice to confirm
and turn off the alert.
Bolus delivery is interrupted.
See the section “Alert A8: BOLUS CANCELLED” (page 153) for
more information.
▲
!
The bolus increment that can be programmed into your
insulin pump determines the Standard Bolus amount
using the a and s keys of your insulin pump.
Incorrect programming of the bolus increment may
cause inappropriate insulin delivery. See the section
“Bolus Increment” (page 131) for more information.
WARNING
P59_98.qxp:05006529_GUTS3&4 5/28/08 8:39 AM Page 79