Operation Manual

4
89
4.
Press a or s to increase or decrease
the basal rate.
Tip: When you increase (or decrease) the
Temporary Basal Rate, the duration of
your previous Temporary Basal Rate
increase (or decrease) appears. However,
when you use your pump for the first
time, a default value appears.
Press d to move to the TBR DURATION
screen.
Press a or s to correct and set the
duration.
3.
5.
Tip: You can switch between
programming the basal rate percentage
and duration by pressing d.
Press f to save and exit.
The new Temporary Basal Rate is
immediately activated.
When a Temporary Basal Rate is active,
the pump emits a beep and vibrates once
every hour.
man_05504929001_H_en-us.indb 89 01.06.2016 08:14:48