Operation Manual

4
85
6.
Tip: Press d to loop between
programming the total BOLUS AMOUNT,
IMMEDIATE BOLUS and BOLUS
DURATION.
Check the total and immediate bolus
amounts and the Extended Bolus duration
programmed on the screens.
Press f to confirm both bolus amounts
and the bolus duration. The Multiwave
Bolus symbol blinks for 5 seconds (bolus
delivery start delay).
8.
The pump beeps 3 times and vibrates.
The immediate bolus delivery begins. The
countdown of the remaining bolus
continues to appear on the display.
Note If a Temporary Basal Rate is active
at the same time, the remaining
time and amount of the bolus and
the amount of the increased or
decreased hourly basal rate are
displayed on the RUN screen.
7.
man_05504929001_H_en-us.indb 85 01.06.2016 08:14:48