Operation Manual

4.2 Programming a Standard Bolus

There are 2 ways to program a Standard Bolus:

Quick Bolus Using a and s on your insulin

pump, with bolus increments

determined by the user

Using Standard

Bolus menu

Using d and f to enter the menu

and then a and s to program the

amount

The bolus amount per delivery is limited to 25 units.

After you program a Standard Bolus, there is a delay of 5 seconds

before bolus delivery starts. This delay allows you to cancel the

bolus by pressing the a or s key if desired. The warning W8:

BOLUS CANCELLED is displayed. Press f twice to confirm and

turn off the alert. See chapter 8 Warning W8: BOLUS

CANCELLED.

man_05504929001_H_en-us.indb 72 01.06.2016 08:14:47