Operation Manual

Note Your pump cannot detect infusion set leakage. If you

detect any loss of insulin and all parts are correctly

tightened, immediately replace the leaking component.

Because insulin delivery has been interrupted, check your

blood glucose level and take appropriate action according

to your doctor’s or healthcare team’s instructions.

Note If the battery is too low, the start-up process may not be

able to complete. In this case, the pump beeps five tones

and keeps restarting the process until you remove the

battery or until it is empty.

Note Check the amount of insulin remaining in the cartridge at

least once a day. If you press f from the RUN or STOP

screen, your pump displays the remaining cartridge

content in units.

Before going to sleep, make sure that:

j the cartridge contains enough insulin to last through

the night

j the time and date are set correctly

man_05504929001_H_en-us.indb 54 01.06.2016 08:14:41