Operation Manual

37
2
Procedure to connect the cartridge, adapter and infusion set
3.
Hold the adapter and twist the infusion
set luer-lock connection by hand,
clockwise into the adapter. Do not
over-tighten.
w WARNING
To avoid leakage, tightly attach the infusion set to the adapter.
Turn the infusion set luer-lock connector until it stops. Do not
over-tighten or use any auxiliary tools, as this may crack the
infusion set luer-lock connector and result
in leakage of insulin.
Remove the protective cap from the filled
cartridge. (Do not touch the cartridge tip.)
1. 2.
4.
Push the adapter all the way onto the
cartridge tip, until it stops.
Carefully prepare a new Accu-Chek
infusion set, following the instructions
supplied for use.
man_05504929001_H_en-us.indb 37 01.06.2016 08:14:35