Operation Manual

168
Problem Recommended Action
There is a leak in the system. Check your blood glucose level. Check for leaking insulin at all the
connection points and on the skin. Change the infusion set, the infusion
site, the cartridge and the adapter.
There is an occlusion (blockage) in the system. Check your blood glucose level. Follow the instructions in
chapter 8 Error E4: OCCLUSION.
Priming was not completed (E11 or air bubbles in infusion
set).
Disconnect from the headset and re-prime the infusion set. Always
prime until a bubble-free insulin flow emerges from the tip of the
needle. Ensure that the tubing is free of air. Reconnect to the headset.
man_05504929001_H_en-us.indb 168 01.06.2016 08:14:52