Operation Manual

5
1
1.2.3 Display screens
The screens displayed by your pump relate to one of the
following modes:
j RUN
j STOP
j QUICK INFO
The following screens are all accessed from the user menus (see
section 5.2 Selecting a user menu):
j Information
j Function
j Set-up
Note To save battery life, the screen of your Accu-Chek
Spirit Combo insulin pump goes blank if you do not press
any key for more than 20 seconds. When your pump
shows a blank screen, you have to press a key before any
other operation can be performed.
RUN screen
The screen is blank by default to save energy. The screen goes
blank again after 20 seconds if no key is pressed. By pressing
any key, the RUN screen is displayed when the pump is in RUN
mode. This means that insulin is being delivered to your body
according to the basal rate you have programmed.
Key Lock locked
Pump timer
Cartridge low
Battery low
Active basal rate profile
Time
Current hourly
basal rate
The above screen shows all the possible symbols, including the
current time, the current basal rate profile, and the current hourly
basal rate in units per hour.
man_05504929001_H_en-us.indb 5 01.06.2016 08:14:31