Operation Manual

6
133
6.4 Troubleshooting the Bluetooth
®
connection
In case of problems with the Bluetooth
®
connection or after the
appearance of the warning W10: BLUETOOTH FAULT, you have to
repeat the pairing procedure described in section 6.3 Pairing
your pump with the Meter.
Since only one Meter at a time can be paired with your pump,
you must delete the pairing before you can pair your pump with a
new Meter.
1. 2. 3.
Press d to move to the BLUETOOTH
SETTINGS screen.
Press f to enter the BLUETOOTH
ON / O FF screen.
Press d to move to the PAIRED DEVICE
screen.
man_05504929001_H_en-us.indb 133 01.06.2016 08:14:51