Operation Manual

6
131
6.
Pump screen
Meter screen
4.
Pump screen
Meter screen
5.
Note When Bluetooth
®
is turned off,
you cannot access the Paired
Device menu.
If the pump screen indicates that no
paired device is available, turn on the
Meter in pairing mode by holding down
* and simultaneously pressing +.
Press the d key on the pump to see the
ADD DEVICE screen, and press f to
initiate pairing.
The pump begins searching and detects
the Meter, displaying its serial number
(This process may take several minutes).
Press a or s to select the number,
which is also shown on your Meter
screen.
Press f on the pump to confirm that
you want to pair the Meter.
man_05504929001_H_en-us.indb 131 01.06.2016 08:14:51