Operation Manual

Chapter 3, Preparing the devices
Accu-Chek Smart Pix user's manual 3-7
3.4 Accu-Chek Compact/Integra
The Accu-Chek Compact/Integra meter has a built-in
infrared port for data transfer. In order to read data from
these devices, proceed as follows:
• Place the device no more than 10 cm away from the
infrared window on the Accu-Chek Smart Pix device.
Both infrared windows must be facing one another.
• Switch the meter on by pressing the
SET and MEMO
buttons simultaneously. The device is now switched
on and in data transfer mode, without advancing
a new test strip.
• The display shows two arrows, and data transfer starts
automatically.