Operation Manual
25
Meter Memory, Setup, and Data Transfer
3
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold
until
set‑up appears on the
display.
1
Press and release
repeatedly until set‑up,
OFF, and the flashing
appear on the display.
2
or
3
Press and release
or to adjust the
level.
Press and release
to
set the level.
To exit, press and hold
until the flashing test strip
symbol appears on the
display.
The set‑up mode is
complete.
4
Setup
Setting the Hypoglycemic Alert
wWARNING
• This function is no substitute for hypoglycemia training by your healthcare professional.
• Consumer: Before you set the hypoglycemic alert, talk to your healthcare professional to help you
decide what blood glucose level is your hypoglycemic level.
• Healthcare professionals: The hypoglycemic level may vary from person to person. It is
recommended to turn the hypoglycemic alert OFF when using the meter in a professional setting.
Press and release
or to switch
between On and OFF.
Press and release
to
set your choice.
If you select On, set‑up
appears and
flashes.
or
52955_07054190001_02_EN.indb 25 12/8/14 2:02 PM