Operation Manual

22
Meter Memory, Setup, and Data Transfer
3
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold
until
set‑up appears on the
display.
1
Press and release
repeatedly until set‑up
and the flashing 1Hr or
2Hr appear on the
display.
2
Press and release
or to select
1Hr or 2Hr.
Press and release
to
set the option.
To set up more options,
press and release
.
To exit, press and hold
until the flashing test strip
symbol appears on the
display.
3
This display appears
when a post‑meal test
reminder occurs.
The post‑meal test reminder:
• beeps 1 or 2hours after the blood glucose
test to remind you to do a post‑meal test.
• beeps every 2minutes up to 3times.
• turns o by inserting a test strip or pressing
any button.
• If a test was performed within 15minutes
of a test reminder, the test reminder does
not beep.
• If the meter is on at the test reminder time,
the test reminder does not beep.
• Exposure to cold conditions may disable test
reminders until the meter is turned on.
Setup
Setting the Post‑Meal Test Reminder
NOTE
52955_07054190001_02_EN.indb 22 12/8/14 2:02 PM