Operation Manual

5
31
Meter Memory, Setup, and Data Transfer
Turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold
until
set-up appears on the
display.
1
Press and release
repeatedly until set-up,
OFF, and the flashing
appear.
2
Press and release or
to switch between On and
OFF.
Press and release
to set
your choice.
If you select On, set-up
appears and
flashes.
3
Press and release or
to adjust the level.
Press and release
to set
the level.
To exit, press and hold
until the flashing test strip
symbol appears on the
display.
The set-up mode is
complete.
4
WARNING
• This function is no substitute for hypoglycemia training by your healthcare professional.
• Before you set the hypo alert, talk to your healthcare professional to help you decide what blood glucose
level is your hypoglycemic level.
Setting the Hypoglycemic (Hypo) Alert
51742_06333630003.indb 31 1/22/13 1:17 PM