Operation Manual

5
29
Meter Memory, Setup, and Data Transfer
Turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold
until
set-up appears on the
display.
1
Press and release
repeatedly until set-up,
and the flashing 1Hr or
2Hr appear.
2
Press and release or
to select 1Hr or 2Hr.
Press and release
to
set the option.
To set up more options,
press and release
.
To exit, press and hold
until the flashing test
strip symbol appears on
the display.
3
This display appears when
a post-meal test reminder
occurs.
4
NOTE
The post-meal test reminder:
• beeps 1 or 2 hours after the blood glucose test to
remind you to do a post-meal test.
• beeps every 2 minutes up to 3 times.
• turns o by inserting a test strip or pressing any
button.
• If a test was performed within 15 minutes of a test
reminder, the test reminder does not beep.
• If the meter is on at the test reminder time, the test
reminder does not beep.
• Exposure to cold conditions may disable test
reminders until the meter is turned on.
Setting the Post-Meal Test Reminder
51742_06333630003.indb 29 1/22/13 1:17 PM