Operation Manual
90
Acoustic mode
8
There are two types of beep tones, diering in pitch. Warnings have a higher pitch (Tone 2, represented
herein as
) than the other beep tones (Tone 1, represented herein as ). The following table shows
which tone sounds for which event.
Beep tones
Tone 1: Tone 2: (warning)
Turning on Announcement of an error message
Test area is advanced to the tip of the cassette Notification that the batteries are almost empty
Prompt to apply blood or control solution Notification that the test cassette is empty
Start of test
Signal that test results are about to be
announced
Announcement of the test result
Beep tone when turning on
When the acoustic mode is turned on, you hear 1 beep tone ( ) when you turn the meter on, regardless
of how you turn the meter on.
Beep tones during a test
After the power-on beep, you hear 1 beep tone ( ) during the test when:
• the meter advances a test area to the tip of the cassette,
• you are prompted to apply blood or control solution,
• the test begins.
You hear the test result, which is composed of dierent beep tones.
You hear several beep tones when the meter displays an error message (
).
man_08252963001_02_EN-AUS.indb 90 27.02.2018 10:12:31