Operation Manual

76
Analysing test results on the PC
7
Analysis with a meter already connected
If you have already connected the meter to a PC with the USB cable but the meter is o, proceed as
follows:
3
Use to select Data transfer
or Reports.
Test results start transferring
when you select Data transfer.
The meter connects to the PC
when you select Reports.
Press
to confirm your
selection.
2
Use to select PC analysis.
Press
.
Turn the meter on with
.
In the Main menu, use
to
select My data.
Press
.
1
man_08252963001_02_EN-AUS.indb 76 27.02.2018 10:12:30