Operation Manual

71
7
Analysing test results on the PC
3
Use to select Default.
Press
.
1 2
In the Main menu, use to
select My data.
Press
.
Use
to select PC analysis.
Press
.
There are two ways of displaying the test results on a PC via the PC analysis menu:
• Reports allows you to display and analyse the test results on a PC by means of the meter’s built-in
diary function software and an Internet browser, no additional software is required (see Reports
page77).
• Data transfer transfers the test results to the PC. You can use special software products for diabetes
management (for example, the Accu-Chek 360° diabetes management system, the Accu-Chek
SmartPix software or Accu-Chek Connect online) to display the data on a PC and analyse it (see Data
transfer page74). With this setting, the meter also supports data exchange between medical
devices with the ContinuaCertified
®
logo from the Continua Health Alliance.
These analysis options help you and your healthcare professional to manage your data and the graph and
table views help you to better understand your test results.
Defining the default
You can define how the meter reacts after being turned on when you connect it to a PC.
man_08252963001_02_EN-AUS.indb 71 27.02.2018 10:12:28