Operation Manual

70
Analysing test results on the PC
7
Analysing test results on the PC
The meter has a built-in USB port 1 for transferring stored test results to an appropriately equipped
computer (PC).
You need 1 USB cable to connect the meter to a PC. The USB cable must have the following connectors:
• Micro B connector 2 to establish a connection with the meter.
• USB A connector 3 to establish a connection with the PC.
1
3
2
USB port
man_08252963001_02_EN-AUS.indb 70 27.02.2018 10:12:28