Operation Manual

67
6
Using the meter as a diary
If the last (most recent) result in the memory is displayed as XX.X mmol/L with dashes instead of the time
and date, the last test did not deliver a result. This means that during the last test either an error message
was displayed or you did not apply blood (or control solution) after the prompt Apply drop was displayed.
After the next test that delivers a result, the result displayed with X is deleted from the memory.
XX.X mmol/L is also displayed if no results are stored in the meter.
Retrieving averages
The meter can calculate averages from the stored test results.
1
2
3
Averages Time periods
You can choose which test results are used for calculating the averages:
• All results 1
• Only test results that were flagged with Before meal 2
• Only test results that were flagged with After meal 3
When you have made this selection, you can choose the period of time in which the test results were
obtained. The last 7, 14, 30 or 90 days.
The average is calculated from all test results that match your selection. However, the following results
are not included in the calculation:
• Control tests (flagged with
)
• Test results displayed as
or
Selecting the time period 4 only determines which average is displayed first. You can use the
buttons to switch directly from one time period to the others. The calculated average 5 is displayed,
together with the number of test results (called Tests) from which the average was calculated 6.
4
5
6
man_08252963001_02_EN-AUS.indb 67 27.02.2018 10:12:26