Operation Manual

96
Checking the meter
9
6
Press .
The test ends after 5 seconds
and the meter displays the result.
5
Take the brush away from the
test area as soon as Test in
progress appears on the screen.
The test area has absorbed
sucient control solution, the
beep tone sounds and the control
result is displayed.
4
Apply the control solution to the
centre of the test area at the tip
of the cassette using the tip of
the brush.
H
Do not hold the meter with the
test area pointing upwards
while you apply control solution
because the solution could
enter the meter and soil it.
man_07438877001_01_EN.indb 96 11.05.2015 14:08:02