Operation Manual

70
Analysing test results on the PC
7
Analysing test results on the PC
The meter has a built-in USB port (Universal Serial Bus) 1 for transferring stored test results to an
appropriately equipped computer (PC).
You need 1 USB cable to connect the meter to a PC. The USB cable must have the following connectors:
• Micro B connector 2 to establish a connection with the meter.
• USB A connector 3 to establish a connection with the PC.
1
3
2
USB port
man_07438877001_01_EN.indb 70 11.05.2015 14:07:48