Operation Manual

19
2
Steps before testing
Setting the language
The meter automatically prompts you to set the language the first time you turn it on. When you turn the
meter on for the first time, the language selection menu is automatically displayed. You can either select
the default language or replace it with a dierent language.
2
Press to confirm the selected
language.
The meter then runs a display
check.
1
Use to select a language.
Press
to select the desired
language.
The meter displays the language
you have selected.
i
If you selected the wrong
language by mistake you can
change this setting later (see
Making settings page47).
The Language menu is marked
with the symbol
.
man_07438877001_01_EN.indb 19 11.05.2015 14:05:38