Operation Manual

128
Messages and problems
14
E-8
Move to a place where the
temperature is at least +10°C
and wait for the temperature of
the meter to adjust to this
temperature.
E-7
If the error message reappears
after turning the meter on again:
Contact the customer support
and service centre (see
page134).
E-9
Insert two new batteries.
E-8
Move to a place where the
temperature is at most +40°C
and wait for the temperature of
the meter to adjust to this
temperature.
E-6
Do not apply blood or control
solution to the test area until the
prompt Apply drop is displayed.
Repeat the test.
man_07438877001_01_EN.indb 128 11.05.2015 14:08:30