Operation Manual

109
11
Cleaning the blood glucose monitoring system
3
The steps that follow are
identical to steps 2 to 4 in
Chapter 10, section Replacing
the test cassette, which are
accompanied by illustrations (see
page105).
Turn the meter over so that the
back is facing upwards.
Push the slide button for the
cassette compartment cover
upwards so that the cassette
compartment cover springs
open.
Remove the test cassette from
the cassette compartment.
2
If you do not want to clean the
meter now, press
.
If you do want to clean the meter,
open the tip cover.
The meter prompts you to
change the test cassette. About
2seconds later, the meter turns
itself o automatically.
1
In the Tools menu, use to
select Change cass..
Press
.
The meter prompts you to open
the tip cover.
Cleaning
If you notice that the area around the tip of the cassette is visibly soiled and you want to clean the meter,
proceed as follows:
man_07438877001_01_EN.indb 109 11.05.2015 14:08:15