Operation Manual
103
10
Tools menu
Viewing the number of available tests
With the meter o:
1
Press and hold until the meter
turns on (longer than 2seconds).
The number of available tests is
displayed. The meter turns o
again a short time later.
Replacing the test cassette
If you want to replace an empty test cassette or a test cassette that has expired, continue reading in the
section Replacing the test cassette (see page105).
If you want to remove a partly used test cassette which still has unused test areas, you must first perform
the preparatory steps described in the section Preparing test cassette replacement (see page104).
i
If you re-insert the partly used test cassette in the meter and there was another cassette in the meter
before this, the partly used test cassette loses a test area.
man_07438877001_01_EN.indb 103 11.05.2015 14:08:07