Operation Manual

42
Settings
The procedure for changing the settings is as follows:
The settings have a fixed sequence and are displayed consecutively,
see illustration on the previous page.
Press the S button to call up the settings.
A test strip is not advanced.
Press the M button to change the setting that is currently flashing.
Numbers such as the year are incremented by one. Pressing and
holding down the button increments the number quickly.
From the highest selectable number, pressing the M button auto-
matically takes you to the lowest one.
In the case of settings where there are a number of options, such
as the beep tone setting, pressing the M button presents each
option in turn.
Press the S button to save the chosen setting and move on to the
next setting.
You can change any setting at any time. Press the S button repeat-
edly until the setting you wish to change is displayed flashing.
AC_CP_LCM_Manual_EN-UK final.indd 42_CP_LCM_Manual_EN-UK final.indd 42 20.6.2007 11:04:0320.6.2007 11:04:03